Gryphon Antileon Signature Stereo - Manual (Page 14)

epoxy resin to optimise trans-
former vibration damping.
The faceplate is machined from
a solid 40 mm black acrylic
block. An LED display provides
continuous information on Class
A status and AC condition.
With the exception of the face-
plate, the Antileon exterior con-
sists entirely of brushed, black
anodized alluminium. Allen
screws are countersunk for
clean appearance.
Installation
Unpacking
Obviously, the purpose of pack-
ing materials in the transporta-
tion of heavy amplifiers is to pro-
tect the product on its perilous
journey from manufacturer to
proud owner.
Unfortunately, in out experience
this is often results in sprained
backs and bleeding fingers at
the moment of truth: the uncraft-
ing of hefty power amplifier.
The instructions found on top of
the box includes instructions and
illustrations of how to disassem-
ble and assemble the transporta-
tion box.
The Clip lok case can be com-
pletely dismantled for easy stor-
age.
Keep the box an all the clips in a
dry place
Keep the Clip-Lok instruction
with this manual in case you
need to assemble
The following items are
enclosed:
1 Antileon Signature
1 Pair of Gloves
1 Acrylic polish
2 AC Power cords
1 Warranty card
If anything is missing or dam-
aged, please contact your
Gryphon dealer immediately.
AC Power
VERY IMPORTANT
Before installation, you must
ensure that sufficient current is
available from you domestic AC
power supply:
Minimum: 10A for 220/240 V
Minimum: 20A for 100/120 V
It is also very important that the
wiring from your AC breaker can
carry the high constant AC volt-
age with only a minimum of loss.
A conductor with a minimum
gauge of 1.5 sq. mm. Is recom-
mended.
The Antileon should ideally be
connected to a separate AC
14