Gryphon Antileon Signature Stereo - Manual (Page 18)

checking 10 times per sec. when
the amplifier is on regardless if
the amplifier is on stand-by or
active.
DC & HF:
When DC or HF from the source
components is detected, the
Antileon will mute immediately:
Normal operation will resume
when the error condition is cor-
rected.
OVERHEATING:
When excessive heat is detect-
ed, the thermal sensor will mute
the amplifier: Normal operation
will resume when the tempera-
ture is within safe operating lim-
its.
SHORT CIRCUIT:
Special care should be taken at
all times to avoid shorting the
loudspeaker outputs. If a short
circuit should occur, the Antileon
will open an internal (not user-
replacable) fuse. Contact your
dealer/distributor for service.
We are aware that the Antileon is
the choice of the very experi-
enced audiophile, so please
bear with us while we repeat cer-
tain ground rules:
TURN ON PROCEDURE:
1. Turn on source components,
Turntable, CD Player, etc.)
2. Turn on preamplifier
3. Allow a few moments for com-
ponents to stabilize, (tube equip-
ment may require more time).
4. Turn on power amplifier
TURN OFF PROCEDURE:
1. Turn off power amplifiers.
2. Turn off rest of the system.
PLEASE
ALWAYS TURN OFF OR MUTE
THE POWER AMPLIFIER
BEFORE CONNECTING OR
DISCONNECTING ANY
CABLES IN THE SYSTEM.
INTERNAL FUSES
Under the small top cover,
behind faceplate.
From left
Fuse # 1
1 A F (spare)
Fuse # 2 1 A F (spare)
Fuse # 3 1 A F
Fuse # 4 200 mA T
Fuses 1 & 2 are only spare fuses
for fuseholder # 3
Fuse # 3 is the protection system
fuse.
Fuses # 4. is the fuse for the AC
power up system.
18