Gryphon Pandora - Manual (Page 11)

Link in is automatic switching
the Pandora on/std when con-
nected to a unit with same fea-
ture and protecol.
Link out is automatic switching
other compatible units on/std
from the Pandora.
Front panel and
remote functions
The level selected using the
Volume wheel, position is
shown numerically in the dis-
play.
MUTE turns sound off without
using the volume controls.
ON/STANDBY turns the pream-
plifier on or activates Standby
mode. The red on symbol in the
display remains illuminated
when the preamplifier is in
standby.
MONITOR is used to listen to a
tape recorder. If the recorder
has a source/monitor function,
this switch may be used to lis-
ten to the tape as it is being
recorded.
Use INPUT Up or Down to
select the source which you
wish to hear. The source select-
ed will be shown in the display.
Menu-activated
functions
The Gryphon Pandora
incorporates several functions
which are accessed via a Menu
system.
To access the Menu, press
Menu. MENU will appear in the
display and the Pandora will
mute its output. CONTINUE will
blink in the display. To enter the
Menu, press Monitor. If you do
not wish to access the menu-
controlled functions, press an
Input button so that EXIT blinks
in the display, then press Monitor
to return to normal playback and
to the normal display.
When you enter the Menu,
NAME INPUT will appear in the
display. Press Menu again to
move through the menu-con-
trolled functions in the following
order:
Name input - Change max level -
Change start level - Balance -
Input level match - Legato option
- dedicate input to 3 AV - Display
brightness - Green Bias set-up -
restore settings. - Continue/exit.
At the end, you can either con-
tinue from the beginning of the
list or exit the Menu. To return to
the top of the list, press Monitor
11