Gryphon Pandora - Manual (Page 14)

Input level Match
Within the level match menu
you must choose the input that
you wish to adjust. This is done
with the up/down function.
After you have selected your
input you can increase the level
in 1 dB steps from 0 dB to +
8dB.
Default is 0dB on all inputs.
Legato phono Option
Pandora is prepared for the use
of the ultimate Legao Legacy
phono module or the Phono
stage 2 module. If a Legato
Legacy is used the Legato
option must be activated in the
menu and the input 6 can then
be choosen with the input up
down.. If Legato option is not
choosen it is only possible to
select between 5 source
components
If Phono Stage 2 is used, RCA
input 4 is dedicated input and
no set-up in the menu is
required.
Green Bias set up
Within the Green bias set up
menu you can choose the fol-
lowing settings.
setting 0 - 26 Low
setting 27 -45 Medium
setting 46 - 84 High
Assigning Input 3 as
a Dedicated AV
Connection
You can use the Pandora with a
stereoamplifier in a normal
stereo set-up but using a sepa-
rate surround processor, you
can connect the left and right
front channels from your sur-
round processor to Input 3 of the
Pandora and using the Menu to
configure this input so that the
signal bypasses all preamplifier
stages in the Pandora. This
allows you to enjoy the full per-
formance of the Pandora for
stereo and surround listening
without placing any surround
components in the stereo signal
path.
CAUTION: When Input 3 is set
up as a dedicated AV connec-
tion, the Pandoras volume con-
trol is automatically set at a fixed
level. The signal from the sur-
round processor goes to the
Pandora power amplifier section
and MUST be calibrated and
attenuated by the surround
processor.
When DEDICATE INP.3 TO AV
appears in the display, press
Menu to select the next menu-
controlled function, if you do
NOT wish to connect the left and
right front channels from a sur-
round processor to Input 3 of the
14