Gryphon Scorpio - Manual (Page 10)

be connected to any line input
on your pre amplifier or integrat-
ed amplifier. *
B.1 S/PDIF 75 to be connected
to an external D/A converter.
* We do not recommend the
use of direct connection to
power amplifiers via a passive
volume control.
AC Master switch
Placed under unit at front.
We know that the Scorpio is not
your first CD player and you do
not need to learn how to use
the basic functions of a CD
player.
In the following we shall only
address the more complicated
features of the Mikado
Remote control
functions:
Amp.
Pressing this button simultaneously
with the: INP-, INP+, VOL-, VOL+,
allow you to remotecontrol basic
functions of the Atilla Integrated
amplifier.
Stand-by
Sets the Mikado in a powersav-
ing stand-by mode.
Tray
Open/close the disc tray
Time:
1 push - total time played
2 push - return ( shows status
of single track )
Repeat
1 Push - repeats the entire disc
2 Push - repeats current track
Disp- / Disp+
Here the display light intensity
can be adjusted.
High
Medium
Low
Off
When display is off, pressing
any button will briefly turn dis-
play on. Press again to activate
the display function.
Display off is indicated by blue
LED on front of player.
Search
When holding the button 'NEXT'
or 'PREV' down for more than 1
sec., the Scorpio will perform a
search forward or search back-
ward on the CD playing.
10
The master On/Off switch on
the Scorpio is placed on the
underside of the unit near the
front.