Warranty, Safety instructions, Placement – Gryphon Scorpio User Manual

Page 12

Advertising
background image

Warranty

The Gryphon Scorpio is warrant-
ed against failures arising
through faulty workmanship and
materials for a period of 3 years
( laser/transport 2 years ) from
date of purchase. The warranty
is not transferable.

This warranty

is only valid in the country where
the product was purchased

.

All claims under this warranty
must be made to the distributor
in the buyer`s country by return-
ing the unit securely packed in
the original box with all acces-
sories, postage/freight prepaid
and insured. Original sales slip
must be included. The unit will
be repaired or replaced at no
charge for parts and labor.

This warranty remains valid only
if the serial number of the unit
has not been defaced or
removed and if repairs are per-
formed only by authorized
Gryphon dealers or distributors.
If the voltage has been changed,
the warranty is void and the
product may be unsafe or mal-
function.

Warranty does not cover dam-
age due to misuse, accident or
neglect. The distributor or manu-
facturer, Gryphon Audio
Designs, Denmark, retains the
exclusive right to make such

12

judgement on the basis of
inspection.
The retailer, distributor or manu-
facturer of the Gryphon shall not
be liable for consequential dam-
age arising from the use, misuse
or failure of this product, includ-
ing injuries to persons or proper-
ty.

To secure the best service, the
enclosed warranty registration
card must be filled out and
returned to the manufacturer
within 10 days of purchase.
Alternatively, you may wish to
register online from our website.
www.gryphon-audio.com

To confirm your warraty registra-
tion, you will receive a little
Gryphon token to welcome you
to the family of Gryphon owners.

SAFETY
INSTRUCTIONS

Do not expose the unit to drip-
ping water or moist.

Placement:

Do not place your Scorpio on
top of any heat producing prod-
ucts, such as power amplifiers
or DACs. If you place the
Scorpio inside any Hi-FI furni-
ture or cabinets, there must be
a clearance of a minimum of
10cm (4 inches) above the
product and a minimum of 5cm
(2 inches) along the sides. To
allow a flow of cooling air the
back of the cabinet must be
open. If these guidelines are not
observed, overheating may
result.

Hazardous live

AC power

CLASS 1 LASER PRODUCT

Caution – use of controls or adjust-
ments or performance of proce-
dures other than those
Specified herein may result in haz-
ardous radiation exposure.

Laser radiation is only accessible
when cover is removed and switch
is overridden.

Advertising