Gryphon Trident II User Manual

Page 15

Advertising
background image

or a bass – at best, it is just a deep sluggish tone.

The Bass tower electronics
Each tower has a amplifier capable of delivering 1000 watts to
the drivers.
It also has some adjustments to support precise integration
with panels and the room.
One of the towers is the master and the other is the slave.
The master tower houses all the intelligent circuits that res-
ponds to the remote control or other functions, these com-
mands are communicated to the slave with a data-only cable
between them. This set-up with only one master in charge se-
cure that no misunderstandings can occur.

Master tower control.
Adjustments applies to both towers automatically.
Warning:
Be aware that there is 1000 watt amplifier in each tower that
can deliver a huge output in very low frequencies if instruc-
tions are not observed. Please be very careful when handling
this system

View from above

viev from side

Note that the curve of the baf-
fel is duplicated as the curve of
toe-in of the speakers.
This system is designed for on-
axis listening and the curve on
the baffel is providing true
timeallignement and maxium
dynamics. The default distance
is to speakers is 5 meters de-
pending on where the ”hot
seat” is preferred.

Advertising