Gryphon Trident II - Manual (Page 16)

Vol+/Vol-
Bass level up or down.
Q+/Q-
Optimizing bass performance to the specific room.
Low cut
Use this with turntable use to prevent overloading the system
with low level noise from turntable ( rumble) or to prevent di-
sasters with a dropped tone arm
MUTE
Always, if you change cables – or turn the towers off.
1000 Watts releassed in the basse is a scary experience.
In & out puts
XLR in
Connect to balanced output from balanced preamplifier XLR -
AES standard- ( pin 2 positive, Pin 3 negative, Pin 1 shield )
XLR out
Can be used to loop to Mid/Hi amplifier if preamplifier do not
have 2 outputs.
XLR/RCA
Toggle Switch between balanced or single ended connection
CONNECT ONLY TRIDENT LL TOWER TO PREAMPLIFIERS
WITH ABSOLUTELY STABLE DC OPERATION. NEVER TURN
PREAMPLIFIER ON OR OFF OR MOVE TOWER UNLESS THE
TRIDENT LL MASTER IS TURNED OFF.
RCA/in
Connect to single ended output from preamplifier
RCA out
Can be used to loop to the Mid/Hi amplifier if your preampli-
fier do not have 2 sets of outputs.
Ports
Display
Connect LED display here
Data Interface
Link between Master and Slave
Error
Indication of malfunction