Hall Research VSA-HA-DP - Manual (Page 5)

3
© Copyright 2014. Hall Research, Inc.
All rights reserved.
HDMI Wall Plate with Audio Extraction
2.3. Tool Bar Menu
Restore device settings from file
Used to select previously saved files
Save device settings to a file
Saves the current configuration file to any location on the PC.
Restore the device to factory default settings.
The user must confirm the action.
Factory Defaults
Import an EDID (256-byte binary or XML file) into the unit.
Import EDID
Save the current EDID as a 256-byte binary file
This file can be edited using third party software and reloaded using
the 'Import EDID' tool selection.
Export EDID
Writes the current 256-byte EDID to the sink device currently
connected to the output . The user must confirm the action.
Write EDID (use with caution)
This command tries to alter the EDID of whatever is connected to
the HDMI output (of the VSA receiver). Most displays such as LCDs
or projectors may have a Read-Only EDID, in which case this
command will not able to alter the EDID in the display. The user
must confirm the action and take all necessary precautions to
prevent loss of data. Hall Research is not responsible for any
damage that may occur from the user attempting to modify the
EDID of the sink device.
Allows field upgrade of the firmware in the VSA-HA-DP. If your unit
is not upgradable, then this function will be disabled.
Firmware Update
Exits the application
Displays screen with software versions, website link, legal
disclaimer and copyright information