Hall Research VSA-HA-DP - Manual (Page 8)

VSA-HA-DP Software Guide
6
© Copyright 2014. Hall Research, Inc.
All rights reserved.
Disable DDC
Enabling this control will turn off the DDC communication with the SOURCE device. The
SOURCE will receive no response from any HDCP or EDID requests. This effectively
disables the SOURCE from displaying HDCP content and most PC's will not output any
video if they can't read the EDID.
FACTORY DEFAULT is not enabled (HDCP and EDID are enabled).
2.7. Status
No Video
Video Input
Indicates the system is not receiving an INPUT video signal.
HDCP On
Indicates video received has HDCP Encryption enabled.
HDCP Off
Indicates video received has HDCP Encryption disabled.
No Audio
Audio Input
Indicates no audio received (DVI mode)
Multi-Channel
Indicates HDMI audio received is not LPCM format.
2 Chn
Indicates HDMI audio received is LPCM format.
Connected or Disconnected
Video Output
Indicates the state of the device connected to the VSA-HA-DP OUTPUT.
2.8. EDID Data Display
The data shown in the EDID table is continuously and updated on the screen. Also the
software ensures that the checksums for each block is valid.