Hamilton Buhl FlashSign Software User Manual
Page 13
13 / 26
Setup Date & Time
You can setup YEAR, MONTH, WEEK, HOUR or MINUTE separately.
1. Press DOWN button in Main Menu to select “Setup Date & Time, and then press
Play/Pause button to enter Setup Date & Time page.
2. Select the item needing modifying by pressing LEFT/RIGHT button, and modify it when the
cursor on it lights.
3. Increase number by pressing UP button or decrease number by pressing DOWN button.
4. Select “CONFIRM” option by pressing RIGHT button to exit after finishing setting.
On/Off Time Setup:
The settings below enable you to set either specific on/off times for each day or the same
time for the week
Setting it for each specific day means power is conserved and prolongs the life of the unit by
not running the unit un-necessarily