Hamilton Buhl FlashSign Software - Manual (Page 23)

23 / 26
Important Note:
The software provided is extremely versatile but also sensitive to the content which is loaded in
to the unit.
Please take particular note as to the type of files the unit is compatible with.
This is very important as incompatible files will cause the unit to freeze or malfunction.
In almost all instances, if this does happen, removing and re-formatting the CF card or USB/CF
card will usually fix the problem.
The CF memory card can also be formatted whilst still in the unit via the Remote Control-
please refer to the” format memory card” section under Remote Control use.
When removing and re-inserting the CF memory card always ensure the unit is turned off.
When re-inserting the card back into the unit line the grooves on the CF card slot carefully with
the grooves on the card (with the main label on the CF card facing towards you) and gently push it in.
Do not force it in under any circumstances.
Then turn the unit back on.
This process should have the effect of re-loading the Loop and Display file back into the unit.
It should now be able to function properly.
Please refer to the trouble shooting guide below if problems occur.