Image recall, Rgb input switch, Output switch – Hamilton Buhl VP-35 User Manual
Page 30: Usb image capture and video recording, Usb 2.0 port, Rs232 control
30
pressing one of the numerical buttons on the front panel or remote control. Press "SAVE" to
capture the current displaying image.
IMAGE RECALL
By pressing “RECALL”, all saved images are displayed in the thumbnail index mode for easy
selection.
RGB INPUT SWITCH
Press the “PC 1/2” to toggle between the two VGA input signals.
OUTPUT SWITCH
Use “Video 1/2” to switch between Composite video & S-Video signals.
USB IMAGE CAPTURE AND VIDEO RECORDING
The USB port can be used to capture still images from the VP-35 into a computer. In this way, the VP-35
can be used as a 3-D scanner for your computer.
USB 2.0 PORT
The USB port can be used to capture still images from the VP-35 into a computer. In this way, the VP-35
can be used as a 3-D scanner for your computer.
Connect the VP-35 to your computer with the supplied USB cable. The capture software is
available on the supplied CD-ROM.
RS232 CONTROL
The RS232 terminal allows you to integrate the VP-35 into any sophisticated central control system.
RS232 also enable you to control the VP-35 via computer.