Hamilton Buhl VP-35 - Manual (Page 8)

8
4. REMOTE CONTROL
1. Save: Capture the image in display.
2. Recall: a. Image recall mode enabled, display the saved images.
b. When a memory stick was connected, press Recall to show the content that in the
memory stick
c. Back to upper lever in image recall mode.
3. Title: Enable the title function(title freezing).
4. Split: Split screen, enable the comparison between the frozen image and live image.
5. Neg: Switch the image mode between positive and negative.
6. Rotate: Rotate the image by 90
o , 180 o , 270 o .
7. Freeze: Freeze/unfreeze the image.
8. PIP: Active the Picture in Picture function.
1>. Press Recall button, then use arrow button to select a saved image, press PIP to choose
it for PIP image.
2>. Press Recall to exit the image recall mode, press PIP again, then there will be a small
window on the lower right screen, showing the selected saved image.
9. Page +/-: Page up and page down in image recall mode.
10. Home: Output the images that from the camera.
11. Red+/-: Image chroma control (red).