Hamilton Buhl HB DVD Duplicator - Manual (Page 12)

___
Hamilton/Buhl
12
2. Test
This function will simulate the copy process to ensure error free duplication. During the
simulation, nothing will be burned on to the blank discs.
1. Using
/ to select 2. Test and press ENT
2. Press
ENT to start test
3. Once the test task is finished, the discs will be ejected and the result and the pass
and fail discs of test task will show on the LCD:
**Note:
1. This function is unable to support DVD+R blank disc.
2. If you use CD/DVD rewritable discs as your blank media in the simulation, all the
content inside the discs will be erased permanently during test simulation.
3. Compare
This function will do bit-by-bit comparison between source disc and copied discs to
ensure the copied discs are identical to source disc.
1. Place source disc and blank discs into Reader and Writer separately.
2. Using
/ to select 2. Compare and press ENT to start compare.
3. The system will detect the source and the target disc automatically.
4. After detecting, the system will start to compare.
5. When the comparison has finished, the system will show the compare result.