2 connecting between projector and pc, 3 the position between projector and whiteboard – Hamilton Buhl LyteBoard User Manual
Page 20
Advertising
Buhl LyteBoard IWB User Guide V.12/7/09
Page 20 of 43
www.buhl-ind.com
3.3.2 Connecting between projector and PC
Connect projector to PC with a VGA cable. Insert one end of VGA into the VGA port of
the PC. (P 3-19)
P 3-19
Notice:
1. Avoid excessive dust, smoke or high-temperature
2. Avoid laying the data cable on the floor in order not to stumble. (Please straighten the
data cable and fix it with a insulating tape which has warning color, in case that the data
cable must be laid on the floor.)
3.3.3 The position between projector and Whiteboard
Facing the bulb of the projector to the center of Whiteboard, namely, the blue broken line
in the following picture (P 3-20)
USB
VGA
Advertising