Hamilton Buhl LyteBoard - Manual (Page 40)

Buhl LyteBoard IWB User Guide V.12/7/09
Page 40 of 43
www.buhl-ind.com
forcibly install, to avoid deformation of Whiteboard.
4. Avoid using the Buhl IWB under excessive dust, wet, high-temperature or strong
light. Keep away from high heat or corrosive chemicals. Please pay attention to
fireproofing, avoid operating while close to the fire. Whiteboard is not waterproof;
therefore prevent it from getting wet by rain or other means. All the above mentioned
situations will cause distortion and aging, also shorten products life.
5. When operate on the projective images, please face the board. When face the
students or the audience, please stand on the side of the board, don’t look straight at the
projector, so as to avoid the eyes damage from strong light of the projector.
6. Need to instruct audiences how to use and warned them not to look directly at the
beam of light from projector.
7. its advised to set up the height of the Buhl IWB to relatively suits the instructor
height for best performance.
5.3 Transportation
When moving the Buhl IWB, it’s recommended to pack it in its original packing
and never lay it flat while transporting to different location. To ensure that all of
components will not be subject to severe shock or impact. Transportation must be
shockproof, moisture-proof, anti-electricity, waterproof, to ensure that Buhl IWB will
function probably when assembled in its new location.
5.4 Maintenance
Do not try to check the inside of the Buhl IWB frame for any reason, since it’s
made from sensitive components so as to avoid accidents or any malfunctions.
Only authorized dealers maintenance workshops are authorized to do so, other wise
the warranty will be invalid. And ensure that the accessories which they replaced are