Hanna Instruments HI 98710 - Manual (Page 15)

MAN98840R3 09/05
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environment in which they
are used. Operation of these instruments in residential area could cause unacceptable interferences to radio
and TV equipments, requiring the operator to take all necessary steps to correct interferences. Any variation
introduced by the user to the supplied equipment may degrade the instrument's EMC performance. To avoid
electrical shock, do not use these instruments when voltages at the measurement surface exceed 24 Vac or
60 Vdc. To avoid damages or burns, do not perform any measurement in microwave ovens.
All Hanna Instruments meters are warranted for two years against defects in
workmanship and materials when used for their intended purpose and main-
tained according to instructions. The electrodes and the probes are
warranted for a period of six months. This warranty is limited to repair or
replacement free of charge. Damages due to accident, misuse, tampering or lack
of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by the
warranty, you will be notified of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Returned Goods Authorization
number from the Customer Service department and then send it with shipping
costs prepaid. When shipping any instrument, make sure it is properly packaged
for complete protection.
WARRANTY
CE DECLARATION OF CONFORMITY
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.