Hase Delhi - Manual (Page 41)

41
3. Safety Distances
The following safety distances must be complied
with for flammable materials and materials sensitive
to heat (e.g. furniture, wood or synthetic cladding,
curtains etc.):
Delhi 114: Within the radiation range of the firebox
pane (fig. 1): 100 cm in front of and 50 cm to the
side of the stove.
Delhi 124: Within the radiation range of the firebox
pane (fig. 1): 110 cm in front of and 55 cm to the
side of the stove.
With regard to flammable materials beyond the heat
radiating area, a safety distance of 15 cm at the
sides of the stove and 15 cm behind the stove has to
be adhered to (fig. 1).
WARNING!
Flammable flooring materials (e.g., wood,
laminate, carpeting,) must be protected
with a floorplate made of non-combustible
material (e.g., tiles, safety glass, slate, or
sheet steel).
The size of the floorplate must be larger
than the base of the stove by at least 50
cm in front and at least 28 cm at the sides
of the stove (Fig. 2).
Depiction of safe distances without rotary
function. Should a base plate be neces-
sary, the range of rotation of the chimney
stove must be adapted.
4. Fuel Load Sizes and Thermal Output
The thermal output depends on the amount of fuel
you put in the stove. When adding more fuel, please
do not exceed the maximum fuel load size of 1.5 kg
(Delhi 114) / 2.0 kg (Delhi 124). Exceeding the maxi-
mum fuel load size leads to a danger of overheating,
which can result in damage to the stove and the risk
of a stove fire.
NOTE!
To attain a thermal output of approx. 5 kW
(Delhi 114) / 7 kW (Delhi 124), burn wood
logs that weigh 1.3 kg (Delhi 114) / 1.6 kg
(Delhi 124) and are no longer than 25 cm
in length for about 45 min.
The Delhi is intended for intermittent operation,
please only apply one fuel layer at a time.
Dimensions in cm
Dimensions in cm
28 28
50
fig. 1
15
50/55
100/110
15
15
100/110
fig. 2
floor-
plate
Radiating Area
Radiating Area