Heath Consultants Sure-Lock All Pro - Manual (Page 37)

34
1. 12 VDC BATTERY CHARGER (HPN 6710777): Used to charge the
transmitter battery from a 12 VDC power source such as a vehicle’s
cigarette lighter. Optional with all model types.
2. PLUNGER BAR (HPN 1900480): The plunger bar provides a superior
temporary grounding source which can be quickly and easily inserted
and removed to enhance the signal strength in the conductive mode.
The plunger bar has a 1/2” steel tempered rod (40” long) and an insu-
lated “piston action” handle which provides shock resistance for the
operator. Optional with all model types.
For more information concerning any of these options, please contact Heath
Consultants Incorporated at the address, phone number, or Web Site as found in
section CUSTOMER ASSISTANCE AND SERVICE LOCATIONS, page 31 of
this manual.
Obviously, we cannot discuss every application of the Sure-Lock in this manual.
We at Heath Consultants Incorporated suggest you become familiar with the
Sure-Lock by practicing with it at a known location of an underground pipe or
cable. Practice using the transmitter in both the inductive and conductive modes
of operation. Practice with the receiver so that you become thoroughly familiar
with the controls and understand what the tones and displays are indicating con-
cerning the conductor being traced and other conductors that may be in the area.
“only as good as the operator”. Take the time to perform the locate properly in
order to obtain the optimum results from this instrument.
For information concerning a pipe or cable locating school, please contact Heath
Consultants at 1-800-HEATH-US (1-800-432-8487) or on the web at www.
heathus.com