HITEC X4-Eighty: DC/DC, Four Port Multi-Charger - Manual (Page 3)

INTRODUCTION
01
Congratulations on your purchase of the Hitec X4-80 Multi-Charger. You are now the
owner of a compact multi chemistry battery charger with battery management and integral
Lithium battery balancing features. The X4-80 features four totally independent and identi-
cal 50 watt charging circuits for a total power of 200 watts. As a result, it can simultane-
ously charge or discharge up to 4 separate battery packs.
The X4-80 can be attached to a 12 volt car battery with the include connector you connect
it to a 11 – 18 V DC power supply with a minimum amperage rating of 20 amps.
The Hitec X4-80 is simple to use, but the operation of a sophisticated automatic charger
such as the X4-80 does require some knowledge and education by the user. This instruc-
tion manual is designed to ensure that you can quickly become familiar with the charger’s
functions and capabilities. It is important that you read this instruction manual in its entirety
before attempting to use your new X4-80 charger.
1. X4-80 Charger
2. Plug-in battery clamps
3. Crocodile clip charging cable
4. Tamiya® charging cable
5. Futaba® RX charging cable 6. 18AWG wire charging cable x 2
7. TP/FP Adaptor
8. XH Adaptor
9. EH Adapter
1
2
3
4
5
6
7
8
9
The Set Contains: