HITEC X4-Eighty: DC/DC, Four Port Multi-Charger - Manual (Page 7)

05
Capacity and Processing Time Limit
The charging capacity is calculated as the charging current multiplied by time. If the
charging capacity exceeds the maximum limit set by the user, the process will terminate
automatically. Additionally the user can set the maximum amount of charging time. If the
charging time exceeds this limit, the process will terminate automatically.
Temperature Threshold*
The battery's internal chemical reaction causes the temperature of the battery to rise
during the charging process. If the temperature exceeds the limit, the charging process
will automatically terminate.
* This function is available by connecting an optional temperature probe, which is not
included in our package.
5 User Customizable Presets
The X4-80 features 10 individually customizable presets so the user can store the charge
and discharge parameters for any particular battery type. These presets can be recalled
for the desired battery type without the need for any additional programming.
Cyclic Charging / Discharging
Batteries can be set to automatically Charge/Discharge or Discharge/Charge up to a
maximum of 5 cycles.
PC Based Analysis Using USB Communication*
The Hitec X4-80 offers a PC-based program which can analyze the characteristics of the
battery via a USB port. It shows a graph of voltage, current and capacity curves. It also
displays the individual voltage of each cell in the lithium battery pack.
* Using optional PC-LINK USB Adapter (sold separately) and software that can be
downloaded from www.hitecrcd.com
SPECIAL FEATURES