Konig Electronic Wireless LAN USB 2.0 dongle 150 Mbps - Manual (Page 2)

2
ENGLISH
Network Dongle Installation
Please follow the instructions below to install your new USB wireless network dongle.
1. Insert the USB wireless
network dongle into an
empty USB 2.0 port when
your computer is switched
on.
Never use force to insert
the dongle. If it feels stuck,
flip the dongle over and try
again.
2. The following message will
appear, click ‘Cancel’.
3. Insert the device’s driver
CD-ROM into the CD/
DVD-ROM drive of your
computer. Select “Driver/
Utility Installation” to install
the software.