Konig Electronic Wireless LAN USB 2.0 dongle 150 Mbps - Manual (Page 6)

6
4. If a password (a.k.a.
‘Network Key’) is required
to access the wireless
access point, please enter
it in the ‘Network key’ field
(and then re-enter it in the
‘Confirm network key’ field
for confirmation). Click ‘OK’
when you have entered
the password correctly.
5. The network dongle will
now attempt to connect
to the access point, this
may take anything from
a few seconds to a few
minutes so please be
patient. When the ‘Status’
becomes ‘Associated’ in
the ‘General’ tab, your
computer is connected to
the selected access point.
Click ‘Close’ to close the
configuration menu.
For advanced settings and other features of this USB wireless network dongle, please refer to the user
manual enclosed on the supplied CD-ROM.