Konig Electronic Blood pressure monitor - Manual (Page 2)

2
ENGLISH
MEM
OR
Y
ST
AR
T
PARTS AND DISPLAY INDICATORS
Systolic
Diastolic
Unit
infl ate to measure
tested one pulse (appears during testing)
defl ate to measure (defl ate air in cuff)
low battery
Wrist cuff
LCD
Battery
Cover
Memory
Start
Pulse
PRODUCT DESCRIPTION
Using Oscillometric methodology and silicon integrated pressure sensor technology; blood
pressure and heart rate are measured automatically and non-invasively. The LCD display
visually shows blood pressure and heart pulse rate measurements.
This blood pressure monitor is designed for use with adults and should never be used
with infants or young children.
SETUP AND OPERATING PROCEDURES
1. BATTERY
LOADING
a. Open the battery cover on the back of the monitor.
b. Insert two “AAA” size batteries taking care that the “+” and “-” ends of batteries are inserted
correctly.
c. Close the battery cover.
d. When the LCD display shows a battery signal, the batteries must be replaced for accurate
readings.
e. Do not use rechargeable batteries because these are not suitable for this product and will
cause inaccurate readings.
f. Remove the batteries if the monitor will not be used for a month or more. This will avoid
damage if the batteries start to leak.