LA Audio EQ231G - Manual (Page 3)

EQ231G User Manual 3
service centre or to the factory with a dated receipt as proof of purchase. After repair
the unit will be returned to you free of charge.
Limitations:
This warranty does not cover damage resulting from accident or misuse. The warranty
is void unless repairs are carried out by an authorised service centre. The warranty is
void if the unit has been modified other than at the manufacturers instruction. The
warranty does not cover components which have a limited life, and which are expected
to be periodically replaced for optimal performance. We do not warrant that the unit shall
operate in any way other than as described in this manual.
3. Installation
It is important to read this section before applying power to the unit
3.1. Inspection and unpacking
The EQ231G is carefully packed at the factory in a carton which is designed to
withstand handling in transit.
However, if transit damage is evident, DO NOT discard any of the packaging material
and notify the carrier immediately, as it is he who is responsible for such claims.
The shipment should contain the following:
The Unit, EQ231G Graphic Equaliser
Power cord
Technical Manual (this book)
If any of the above items are missing, notify your supplier immediately.
3.2. Operating Environment
The unit is designed to operate between 0 and +50 degrees Celsius (32 - 122 F) in an
atmosphere of relative humidity up to 80%.
Should the unit be installed in an equipment rack, it is important to ensure that the
operating temperature inside the rack does not exceed the upper limit. This may be the
case where the rack contains power amplifiers and a cooling fan may be necessary in
such installations.
Although designed to withstand hum pick-up, it is VERY important that the unit is not
installed close to any strong electro-magnetic fields.
3.3. Power Requirements
The voltage is pre-selected at the factory for the country of destination.
Fuse rating EQ231G
(Note: Fuse must be Slow – Blow)
115-125 Volts AC 50/60Hz 200mA
200-250 Volts AC 50Hz 100mA
220 Volts AC 60Hz 100mA