LA Audio EQ231G - Manual (Page 9)

EQ231G User Manual 9
7. Specifications
Frequency Response 20 Hz to 20 kHz +0, -1dB
Signal to Noise Ratio +4dBu output -96dB
Input impedance 20 k
Ω
balanced
Output impedance 100
Ω
balanced
Output Load Impedance 600
Ω
to infinity
Maximum Output Level 600
Ω
Load, 1 kHz +20dBu
Total Harmonic Distortion (THD)
1 kHz, +4dBu Output,
600 Ohms Load 0.003 %
Peak indicator Threshold 2dB before clipping
Centre frequencies :
20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k
1k25, 1k6, 2k, 2k5, 3k15, 4k, 5k, 6k3, 8k, 10k, 12k5, 16k, 20k.
Frequency accuracy :
Better than 5 % of nominal
Input Connectors XLR 3 Pin 2 High, 3 Low, 1 Ground
Output Connectors XLR 3 Pin 2 High, 3 Low, 1 Ground
Power Consumption (115/220 VAC, 50-60 Hz)
EQ231G
8 Volt-Amps
EQ231G
Weight 6.2 kg,
Shipping Weight 7.7 kg,
Dimensions 483 mm W x 230 mm D x 135 mm
Temperature Range
Operating
0C to + 50C
Storage 0C to + 75C
Note : In these specifications, 0dBu is referenced to 0.775 V RMS.
Product information and specifications are subject to change without notice. E&OE