Lab.gruppen PLM 20000Q - Manual (Page 27)

Quick Start Tutorial
21
PLM Series Quick Start and Field Reference Guide Rev 1.3.5
6. Quick Start Tutorial
6.1 Introduction
This section describes installation of the Lake Controller software, input and output connections, basic
functionality, and setup instructions. The information provides a basic level of understanding of the system
architecture along with configuration instructions for a basic system application.
The tutorial in section 6.4 provides a step-by-step example for configuring this device for use with a generic
professional sound system. Please refer to the documentation listed in section 2.3, which provides detailed
information on all features and functionality.
6.2 Lake Processing and Control
PLM Series products contain an integrated Lake loudspeaker management system, providing crossovers,
EQ, dynamics and other functions. Primary control is via the supplied Lake Controller software, although
many functions can be accessed via the front panel interface.
The Lake Controller software allows all parameters to be configured, controlled and monitored; please refer
to the Lake Controller Operation Manual for further details. The Lake Network Configuration Guide provides
information regarding connection of one or more Lake Processors to a PC via an Ethernet network.
6.3 Installing the Lake Controller Software
6.3.1 Overview
The supplied CD-ROM or USB key contains the Lake Controller software package. This should be installed
on any PC/s that will be used to control and monitor the Lake Processor network. In a situation where
multiple networked Lake Processors are involved, this will generally be a Tablet PC.
6.3.2 PC Specifications
The recommended computer specifications for using the Lake Controller software are:
▸ 1.5 GHz Dual Core Processor or faster
▸ 1 GB RAM or greater
▸ 256 MB video RAM or greater (ensure latest video drivers are installed)
▸ Windows 7 or later
▸ Microsoft DirectX ® 8.1 or later