Lab.gruppen C Series 5:4X - Manual (Page 40)

33
C Series C 20:8X, C 10:8X, C 10:4X and C 5:4X Operation Manual rev. 1.1.4
Appendix
C 10:8X
Level Load Rated power Line Current *2) Watt *1) Thermal Dissipation
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby w. remote Power Off via NomadLink 6 0 6 20 5
Power On, Idling 91 0 91 312 79
Amp Watt
Pink noise
(1/8) 70 V / Ch. 125 x8 3,2 1,7 338 125 213 726 183
16 Ω / Ch. 125 x8
2,8 1,5 291 125 166 566 143
32 Ω / Bridged 250 x4
100 V / Ch. 250 x4 2,7 1,4 281 125 156 532 134
8 Ω / Ch. 125 x8
2,5 1,3 254 125 129 439 111
16 Ω / Bridged 250 x4
4 Ω / Ch. 125 x8
2,4 1,3 245 125 120 408 103
8 Ω / Bridged 250 x4
2 Ω / Ch. 63 x8
1,6 0,9 167 63 104 354 89
4 Ω / Bridged 126 x4
Pink noise
(1/4) 70 V / Ch. 125 x8 5,6 2,9 625 250 375 1280 322
16 Ω / Ch. 125 x8
4,5 2,3 507 250 257 877 221
32 Ω / Bridged 250 x4
100 V / Ch. 250 x4 4,3 2,2 484 250 234 800 201
8 Ω / Ch. 125 x8
3,5 1,8 390 250 140 478 120
16 Ω / Bridged 250 x4
4 Ω / Ch. 125 x8
3,7 1,9 411 250 161 548 138
8 Ω / Bridged 250 x4
2 Ω / Ch. 63 x8
2,4 1,2 257 126 131 447 113
4 Ω / Bridged 126 x4
*1) The amplifi er’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
specifi ed here is what is known as the “Active Power” in the amplifi er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw fi gures measured at 230 V. 115 V fi gures are 230 V fi gures multiplied by two.
Table 7.4b: C 10:8X Current Draw and Thermal Dissipation specifications