Lab.gruppen NLB 60E NomadLink - Manual (Page 14)

14 NLB 60E Operation Manual
7.3 DeviceControl Software
After the PC is connected to one or more NLB 60E
units in a valid Ethernet (TCP/IP) configuration,
you may launch the DeviceControl application.
DeviceControl can then either upload an amplifier
configuration from the NLB 60E subnet(s), open a
saved amplifier configuration, or create a new con-
figuration. Key features such as power ON/OFF and
amplifier channel muting will be controlled directly
from the DeviceControl windows. Please read the
DeviceControl Operation Manual for more details on
features and functionality of this software.
When DeviceControl is running and con-
nected to an NLB 60E, the front-panel
keypad commands on the NLB 60E’s will
be locked out. However GPI trigger com-
mands will not be locked out. All other control is
assumed by the DeviceControl software program.
The DeviceControl link must be removed by closing
the application to restore local control by the NLB
60E user interface. When the DeviceControl applica-
tion is closed the local control by the NLB 60E user
interface is restored.
7 connectIon to Pc FoR DevIcecontRoL
5. Click on OK. To verify that your settings are correct,
select and review the Support page.
The PC is now ready to connect to the NLB 60E when
the DeviceControl application is started.