Installing ceiling enclosures above the fume hood, Installing rear panels behind the fume hood – Labconco Protecto Stainless Steel Perchloric Acid Laboratory Fume Hoods 9682100 User Manual
Page 48
Advertising
44
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector Perchloric Acid Hood
Installing Ceiling
Enclosures above the Fume
Hood
Your Protector Perchloric Acid Fume Hood has
mounting holes to accept a ceiling enclosure to close
off the area between the top of the hood and the ceiling.
Contact Labconco Customer Service for ordering
information.
Figure 7-1
Installing Rear Panels
Behind the Fume Hood
Your Protector Perchloric Acid Fume Hood can be
modified to add a rear panel behind the fume hood
when the fume hood is placed on an island. Contact
Labconco Customer Service for ordering information.
Advertising
This manual is related to the following products: