Certification of factory verification, Verification – Lamar Technologies CA 1550 User Manual

Page 17

Advertising
background image

17

CERTIFICATION OF FACTORY VERIFICATION

AIRCRAFT BATTERY CHARGER / DISCHARGE TESTER

MODEL: CA-1550 MIL

P/N: 4159 MIL

MFD. BY: Lamar Technologies LLC

14900 40th Ave NE

Marysville, WA 98271

Cage Code #: 3RCD2

Tel: 415-883-6300

Fax:

415-883-6302 E-Mail:

[email protected]

AC INPUT: 50/60 HZ 115 V 14A MAX., 230 V 7A MAX.

DC OUTPUT: CHARGE 0-25A

DISCHARGE: 0-50A MAX

Refer to Operating Instructions for more complete specifications.

Standards Used Traceable to National Institute of Standards and Technology (NIST)

Calibrated Instruments:

a)

Digital Multimeter Fluke 8010A

b)

Digital Multimeter Fluke 73III

c)

Oscilloscope, Leader model LS1020

d)

Shunt 100A 100MV EMPRO (OHMIC VALUE = .00100 OHMS)

Auxiliary Non-Calibratable Equipment Used:

Batteries:

NiCad Super 17 20 Cell Marathon

Lead Acid RG380E 24V Concorde

Load Bank 1-100 AMP. Power Products

Power Products Factory Test Report / Method No. 4159-3

VERIFICATION:

AMMETER WITHIN

TOLERANCE ___________

VOLTMETER WITHIN TOLERANCE ___________

AMPERE HOUR METER

WITHIN TOLERANCE ___________

TIMER WITHIN

TOLERANCE ___________

SERIAL NO: __________________________

DATE OF MANUFACTURE: ________________

VERIFIED BY: ________________________

DATE OF VERIFICATION:__________________

Lamar Technologies LLC certifies that the above listed P/N 4159 Battery Charger /
Discharger meets or exceeds all published specifications and complies with ISO 9000 where
applicable. Accuracies of calibration of instruments used are traceable to the National
Institute of Standards and Technology.

Advertising