Datamax PE - Manual (Page 93)

PE Series Operator’s Manual F-5
Media Specifications
Figure F-2 Acceptable Media Dimensions
Description Max.
(inches)
Min.
(inches)
A Label width 5.0 1.000
B Backing width 5.0 1.000
C Gap between labels 99.99 0.100
D Label length 99.99 0.500
E Backing thickness 0.010 0.0025
F Label thickness 0.010 0.0025
G Width of sensor opening 0.500 0.170
H Distance media edge to sensor
opening 2.250 0.200
I Reflective sensor mark width. It is
recommended that the entire width
of the label is marked. N/A 1.000
J Distance between reflective mark 99.99 0.500
K Reflective sensor mark length 99.99 0.100
Table F-1 Acceptable Media Specifications
; Note: The reflective sensor mark must be carbon based ink. The
infrared light will not be absorbed by a plain black mark.