Legacy Audio Whisper HD - Manual (Page 12)

12
The Terminal Plate
At the rear of each of your loudspeakers you will find a terminal plate
housing two rows of jumpered binding posts. The upper row is the input to
the "satellite" portion of the speaker. The lower row is the input to the
"subwoofer" portion of the speaker. When left in place, the factory installed
jumper bars allow the speaker to be driven with a single channel
of amplification. (If biamping, or biwiring, be sure to remove the jumper
bars.)
Be sure that you observe polarity when making the connections. The posi-
tive (+) terminal of the amplifier should be connected to the positive termi-
nal of the loudspeaker. The negative (-) terminal of the amplifier should be
connected to the negative terminal of the loudspeaker.
Speaker Connections