Legacy Audio Whisper HD - Manual (Page 15)

15
The high definition Digital Wavelaunch Processor hosts a LEGACY custom algorithm which automatically loads when the processor is powered on. Fac-
tory settings are ‘plug and play’, and do not require a computer to utilize. Connections between the preamp and power amplifier should be as below.
Function Routing
Input Output
Proper equalization of the left Whisper speaker 1 1
Proper equalization of the right Whisper speaker 2 5
Equalization capabilities for a Center channel 3 3
Equalization capabilities for LFE subwoofer 4 7
Equalization capabilities for stereo + LFE mix
Left subwoofer (Lmain + LFE) 1,4 2
Right subwoofer (Rmain + LFE) 2,4 6
(Note: factory configuration for Whisper does not utilize outputs 4 or 8)
(Note: a different routing pattern is required for program 4)
Programs
1 Whspr Normal
standard settings for flat response
2 Bass Plus (increases bass, +2 dB)
3 Bass Minus (shelves bass, -2 dB)
4 Whspr Biamp (includes digital crossover filtering)
5 Subs added (Stereo Subs)
Selecting the Program
1. Press the MENU left arrow
2. Scroll through the programs using the job wheel
3. Press enter to select the program of choice
4. Press enter again to confirm selection. The program will now load.
Users are welcome to load the included software and learn to make individual adjustments as desired. However it is recommended that any changes
be saved as Program 6 or higher to avoid overwriting the factory settings.
Whisper Wave Launch Processor