Legacy Audio Whisper XDS - Manual (Page 21)

21
Making a boost with the parametric EQ
In this example, we have selected Parametric EQ 2 (PEQ2) by clicking in its box, which will turn red to indicate your selection.
Once highlighted, locate the blue boxes with up and down arrows, at the bottom of the interface. These arrows are used to in-
crease or decrease the gain, frequency and Q of the selected parametric EQ. This column shows a 4.00 dB boost at 41 Hz with a
Q of 6.551. A larger Q affects a narrow range of frequencies, while a smaller Q affects a broader range of frequencies. We can
adjust gain, frequency and Q by clicking in the corresponding box. Once highlighted, locate the blue boxes with up and down ar-
rows, at the bottom of the interface. These arrows are used to increase or decrease the gain, frequency and Q settings.
Whisper Wave Launch Processor