LG Motorsports LG C5 GT2 Coil Overs - Manual (Page 6)

Figure 9a and 9b Removal of rear upper shock mount.
Pull the shock free, and clean off any debris that might be on the frame. We have
now completely removed the shock and spring system from the car and are ready to
install our new LG coil over suspension package.
INSTALLATION:
Starting at the front of the car we will first start by installing the upper shock
mount. There should be a nut and washer already started on this when you receive your
package. Remove the nut and washer. Insert the threaded part of the mount through the
hole in the frame that we removed the factory shock from. Place the washer on the top
side of the frame and start the nut. Do this on both sides, leave loose for the moment as
we install the coil over. You can also do this with the mount on the shock, but some do
find it easier to remove this, and install separately.
Figure 10 : Installation of front coil over
Once the upper portion of the shock is mounted we can now lift the lower control
arm up to insert the supplied bolts. Make sure that the upper mount is facing how you
see in figure 10. This way the shock can pivot through the suspension travel correctly
and you can easily see the adjuster.