LG Motorsports LG Drag Spindles - Manual (Page 2)

Parts Inventory:
1. Driver side spindle
2. Passenger side spindle
Optional:
1. C5 rear brake kit (calipers, brackets, rotors, pads, hardware)
Instructions:
Removal:
Start by supporting the car on a lift, or 4 jack stands on a level surface about a
foot or more off of the ground. You will need to remove the rear wheels and tires for
install
If you are going to be installing these when also doing an entire drag kit, go ahead
and remove the front wheels at this time as well. If you are also installing the rear brake
kit, make sure you have brake fluid to bleed the system once everything is complete
Install:
If you are installing these spindles on a base C5 or C6 Corvette (non Z51/GS/ZO6/ZR1)
you can re-use your calipers and hardware. Start by removing the calipers, pads, and
rotors.
Figure 1: Rear suspension with wheel/tire removed