LG Motorsports LG Drag Spindles User Manual
Page 6
Once all items are installed, take a moment to install one wheel and check clearance at
the lower control arm. Note that the wheel will get closer to the arm as the suspension
moves in bump travel. Clearance as needed for your combo. Also you will need to
check your wheel spoke to caliper clearance. Some wheels may require some of the ribs
on the caliper to be removed. You can see this in Figure 7 above as the silver areas on
the caliper.
Torque the wheels and set the car on the ground.
We thank you for choosing LG Motorsports for all of your Corvette needs.
Lou Gigliotti
President LG Motorsports
LG Motorsports is not responsible for any improper install, modification to product, or
any changes made by installer to product. Any welding or modification will void any
product warrantee. LG Motorsports or the dealer is not liable for any loss, damage, or
injury due to the direct or indirect use of this product. These components are intended for
off-road use only and are not intended for use on street legal, pollution controlled
vehicles.