LG Motorsports LG C5 Pro Long Tube Headers - Manual (Page 5)

Once the car is complete please drive the car to check for leaks and any rattles that might
pop up after install. The header and pipe fitment is more critical since the pipes are so
much larger so time must be taken to make sure all pipes are in their right place.
Some tips for those making these a race header. Please note; if you are using
these on a track only car and have removed the AIR injection system, please remove the
flanges from the headers and weld them shut as block off plates can cause problems.
I thank you for choosing LG Motorsports and know that you will enjoy years of
trouble free horsepower and torque from your new Corvette equipped with the most
POWERFUL HEADERS ON THE PLANET, LG Motorsports Pro Long Tubes!
Lou Gigliotti
President LG Motorsports
LG Motorsports is not responsible for any improper install, modification to product, or
any changes made by installer to product. Any welding or modification will void any
product warrantee. LG Motorsports or the dealer is not liable for any loss, damage, or
injury due to the direct or indirect use of this product. These components are intended for
off-road use only and are not intended for use on street legal, pollution controlled
vehicles.
Note: These products are intended for racing use and off-road applications only and are
not legal for sale or use in the state of California, or in states which have adopted
California emissions standards.