LG Motorsports LG C6 Carbon Side Skirts - Manual (Page 4)

Figure 5: Installing Mud Flap to Rocker Panel
Now that the two pieces are joined you will need to drill the remaining attachment points
into the rear fender and lower rocker panel. Use the supplied rivets to attach the mud flap
to the car first then work to the rocker panel.
Figure 6: Final install of Mud Flap to car
When drilling and riveting the panel into the rocker on the car it is best to start in the
middle and work your way towards either end so you have a flat install against the body
of the car. Making sure to blow out the area each time you drill so no debris is between
the body and the panel. Once all rivets are in place you can not tighten the front two
bolts all the way.