Lingenfelter L330030709 CTSV High Flow Intercooler Pump Upgrade Kit v1.0 User Manual

Page 5

Advertising

Page 4.

5. Locate the connector on the rear of the

intercooler pump body and disconnect it by

pinching the metal clips while pulling away

from the pump.

6. Using a 13mm socket, ratchet, and extension

if necessary, remove both M8 nuts that hold

the Adel clamps to the factory mounting

bracket.

7. Remove the intercooler pump from the

mounting bracket, which will expose both M8

mounting studs, as well as the end of the wire

loom retaining clip.

8. Using a pair of hose clamp pliers, loosen the

hose clamp on the outlet hose. Disconnect

the outlet hose from the intercooler pump and

let the hose drain into a bucket.

Advertising