Lodar 4 Function AC relay Receiver, Master and IP Series Transmitter - Manual (Page 3)

F1
Safety
F1
Switch
F2
Safety
F2
Switch
F3
Safety
F3
Switch
F4
Safety
F4
Switch
M
Safety
M
Switch
Power Supply 90 - 264 V
AC
for control circuits
ST -
LK1
LK2
RS232
ANT
Radio Module
Internal Aerial
glue
Connection Detail - Switch V
oltage and Supply V
oltage are the same
Earth Live Neutral Loop wire connecting N
to N
C
S
Important The Receiver will not work without this connection
*If a switch is not used, its input must still be wired, otherwise if its corresponding T
ransmitter Function is operated in error the Receiver will immediately switch of
f.
Common Live
Output 1 Output 2 Output 3
Master Output
Common Live Loop Important ALL
inputs must
be wired *
see note below
W
ire is not supplied with Lodar 96 and 97 Series systems, local wiring regulations apply