Lumagen Radiance 2022/2042 - Manual (Page 42)

Section 12 – Specifications
Radiance 2022 and Radiance 2042 rev 082813 36
Section 12 – Specifications
Inputs
• 10 video inputs:
o
4 HDMI ® 1.4a “3D” (480i to 1080p60)
o
2 Component, SD/HD (480i to 1080i and PC up to 1280x1024 at 60 Hertz)
o
2 SVideo (480i, 576i)
o
2 Composite (480i, 576i)
• 11 audio inputs:
o
4 HDMI 1.4a “3D”
o
2 Analog Stereo
o
2 Digital Optical
o
3 Digital COAX
• Automatic detection for NTSC, PAL and SECAM
• Analog inputs support NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc)
and SECAM (B, D, G, K K1, L).
• Analog audio and video inputs, absolute maximum rating is ±1 volts, referenced to case
Processing
• Proprietary Lumagen No-Ring™ scaling
• Darbee Digital Visual Presence™ (DVP™) enhancement technology
• 10-bit processing for deinterlacing plus a 12-bit calibration pipeline
• Support for HDMI
® 1.4 “3D” including anamorphic lens scaling
• Convert common optional 3D formats to a required format support by the display
• Each input has 4 user configuration memories
• Each input user configuration memory has 8 resolution sub-memories (for HD inputs)
• Each resolution sub-memory is linked to one of 8 output configurations.
• 2:2, 3:2 and 3:3 pull-down for SD/HD film sources
• Per-pixel SD/HD video de-interlacing
• Adaptive diagonal filtering
• MPEG mosquito and block artifact reduction
• Temporal noise reduction for SD and HD sources
• Output resolution up to 1080p60
• User programmable non-linear-stretch (NLS) mode
• 4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios
• Programmable output aspect ratio from 1.10 to 2.50
• Extensive support for anamorphic lenses for both 2D and 3D video
• Large suite of test patterns
• Parametric grayscale and Gamma calibration
• Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette
• 21-point parameter grayscale and Gamma
• Programmable input/output color-space
• Y/C-delay calibration, plus CUE and ICP filtering
Outputs
• 2 HDMI 1.4a, with 3D
• Maximum output rate of 1080p60 for Radiance 2022, and 4k30 for Radiance 2042 (output 2 only)
• Eight channel audio at 192 kHz
• Supports DD True-HD™, and DTS Master Audio™ bitstream formats
• Each HDMI output can provide “stand-by” power to external device of +5V at 50 mA
• 1 Digital COAX audio output
Miscellaneous
• IR and RS232 control (See Tech Tip 11 and 12 on the www.lumagen.com website)
• Wired IR format command input
• Universal, 100-240V, ~50/60Hz external 12 VDC power supply
• Power consumption: 25 Watts including external power supply
• Optional rack mounting ears