Lumagen Radiance XS-3D - Manual (Page 31)

Section 5 – Video Configuration
RadianceXS rev 091211 23
MENU→ Input→ Copy→ OK
Selecting an Output Configuration for an Input Memory
NOTE:
The following section assumes that software 102910 or later is installed in your Radiance.
The output-Mode, CMS and Style for each sub-memory can be set independently. Each input memory “resolution
sub-memory” points to a Mode, a CMS, and a Style memory. For HD capable inputs, each memory has eight
resolution “sub-memories” which are set to default values of 480, 576, 720p60, 1080i50, 1080i60, 1080p24,
1080p60 and Other and automatically selected based on the input resolution and rate. The “Other” sub-memory is
used for any input resolution that isn’t one of the specified input resolutions.
See the “Video Output Setup” Menu section for additional information on connecting an input memory to an output
Mode, CMS and Style.