Luxul XBR-2300 - Manual (Page 4)

4
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
1 INTRODUCTION
The Luxul XBR-2300 Commercial Grade Dual-WAN Router is a feature rich network
device designed to enhance the performance, security and reliability of a home or com-
mercial network. It enables simple monitoring, management and control of network
usage to boost efficiency, reduce network bandwidth and minimize security risks. With
web-based management tools and dual-WAN ports; along with advanced security, VPN,
and bandwidth control features, the XBR-2300 provides the ideal foundation upon
which to build your Luxul network.
XBR-2300 Features:
„
2 WAN Ports, 3 LAN Ports
„
Advanced Firewall Features
„
In-Bound and Out-Bound Load Balancing
„
IP Address, Dynamic Name Support, MAC Address Filtering
„
Failover Between WAN Lines
„
Built in VPN Server
„
QoS via Bandwidth Control Settings
„
Simple Plug and Play
„
Configuration Backup, Recovery and Reset
„
Simple Optimization with Downloadable Configuration Options
1.1 Warnings
„
Read all installation instructions and site survey reports, and verify correct
equipment installation before connecting this device to its power source.
„
Connect all power cords to a properly wired and grounded electrical circuit.
„
Verify that the electrical circuits have appropriate overload protection.
„
Verify there is adequate ventilation around the device, and that ambient
temperatures meet equipment operation specifications.
„
Products outside the approved configurations may be in violation of
Part 15 of the FCC Rules.
1.2 Site Preparation
„
Consult your site survey and network analysis reports to determine
specific equipment placement, power drops, and so on.
„
Assign installation responsibility to the appropriate personnel.
„
Identify and document where all installed components are located.