Luxul XBR-2300 - Manual (Page 48)

48
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
5.9.2 Backup/Restore
This section allows you to Backup and Restore the XBR-2300 configuration.
„
Backup: Click “Backup” to be given a Save Configuration dialog box
„
Restore: Click “Browse” to select a saved Configuration file on your device
5.9.3 Firmware Upgrade
This section allows for the upgrade of the XBR-2300 Firmware. It is recommended to
check regularly for any Firmware updates.
Firmware upgrading steps
1. Browse: To select the path of the Firmware File
2. Upgrade: Performs the upgrade with the selected Firmware File
3. Router automatically reboots after being upgraded
WARNING!: Do not shut down power to the XBR-2300 during the upgrade
process or the router will be damaged. The XBR-2300 will
automatically restart after a successful upgrade. The upgrade
process may take several minutes to finish.
5.9.4 Restore Defaults
This option can be used to restore the XBR-2300 to Factory Default Settings. This is
useful if there are any configuration errors.
„
Default Password: admin
„
Default IP Address: 192.168.0.1
„
Default Subnet Mask: 255.255.255.0
NOTE: Restore Factory Default only takes effect after the router reboots
5.9.5 Reboot
Forces a Reboot of the XBR-2300. This option is used when a configuration change
requires a Reboot in order to take effect.