Luxul XMS-1024P - Manual (Page 5)

Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
Rear Panel
100-240V
-50/60Hz 5.0A
XMS-1024P Rear Panel View
Power Input: Please use the included power cable
PREPARING FOR INSTALLATION
System Requirements
„
Ethernet Cables to connect the XMS-1024P to Ethernet enabled devices
„
Computer equipped with a Web browser. Supported Web browser versions
include Microsoft I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6 and up.
The Web browser is used to configure the XMS-1024P.
„
Power must be AC 100-240V~ 5.0A(Max) 50/60Hz.
Before Connecting to the Network
The XMS-1024P can be rack-mounted or used as a desktop switch. Before connect-
ing to the network, please be aware of the following requirements:
„
Install the XMS-1024P in a stable/safe place to avoid any possible damage
„
Make sure there is space around the XMS-1024P for adequate ventilation and proper
heat dissipation. It is recommended to have at least 4-6 inches around all sides.
„
Do not place heavy articles on the XMS-1024P.
„
Power outlets should be within 5 feet of the XMS-1024P.
„
Verify the ground connection of the outlet is functioning properly.
„
Check the power cord to confirm a secure connection.
„
Avoid placement in direct sunlight.
„
When installing the XMS-1024P on a flat surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.