Luxul XMS-1024P - Manual (Page 8)

Information on this document supersedes all previous versions. Products and documents
subject to change without notice. Products may be discontinued without notice.
LUX-QIG-XMS-1024P
093140913 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
ADVANCED SETTINGS
For login and advanced settings information go to luxul.com
WARNINGS AND SAFETY INFORMATION
„ Verify that the electrical circuits have appropriate grounding and overload protection.
„ Attach only approved power cords to the device.
„ Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment
operation specifications.
„ The XMS-1024P is designed for indoor use only. DO NOT place this outdoors.
„ DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize
exposure to excessive heat or moisture.
„ Small parts and plastic bags used for packaging may be harmful to small children. KEEP All
ACCESSORIES OUT OF THE REACH OF CHILDREN!
„ The XMS-1024P may become warm when in use for extended time periods. This is normal and is not a
malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions may cause harmful interference to radio
communications. However; there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
„ Consult the dealer or an experienced radio/TV technician for help.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that
this Luxul XAP-1500 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For a copy of this report send a self addressed stamped envelope to:
Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.