Marsh Sound Design P2000-B High Performance Line Amplifier - Manual (Page 12)

REMOTE IN
REMOTE OUT
LEFT
RIGHT
CD TUNER DVD VIDEO LINE 1 LINE 2 TAPE VIDEO TAPE 2 1
OUTPUTS REC INPUTS
Marsh
MODEL : MSD- 2000 P
PREAMPLIFIER
SERIAL NUMBER
POWER CONSUMPTION : 15 W MAX
60 Hz AC 120 Volts
TO PREVENT FIRE AND SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. - DO NOT OPERATE WITH COVERS REMOVED -
CAUTION FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH SAME TYPE AND RATING FUSE.
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING
REMOTE IN
REMOTE OUT
LEFT
RIGHT
CD TUNER DVD VIDEO LINE 1 LINE 2 TAPE VIDEO TAPE 2 1
OUTPUTS REC INPUTS
Marsh
MODEL : MSD- 2000 P
PREAMPLIFIER
SERIAL NUMBER
POWER CONSUMPTION : 15 W MAX
60 Hz AC 120 Volts
TO PREVENT FIRE AND SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. - DO NOT OPERATE WITH COVERS REMOVED -
CAUTION FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH SAME TYPE AND RATING FUSE.
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING
Marsh 12
INPUTS The MSD- P2000 have a total of 7 line level inputs.
REC (Recording output monitor) The MSD- P2000 has 2 recording monitor outputs for duplication.
1. CD Receives the signal from a Compact Disc player.
2. TUNER Receives signal from a Tuner.
3. DVD Receives signal from a Digital Versatile Disc player..
4. VIDEO Receives signal from a VCR audio output.
5. LINE 1 Receives signal from a line level source.
6. LINE 2 Receives signal from another line level source.
7. TAPE Receives signal from a cassette tape player.
8. TAPE (REC) Sends output signals from a selected program source to cassette tape input. To
record from the program source onto cassette tape, turn the selector switch to the
source program you wish to record and press record on the cassette tape player.
9. VIDEO (REC) Sends output signals from a selected program source to a VCR audio input. To
record from the program source onto Video tape, turn the selector switch to the
source program you wish to record and press record on the VCR player.
If the program source is set to VCR, then there will be no recording because the VCR
Player cannot play and record at the same time.
7 8 9 10 11 12 13 14 1
Connections
2 3 4 5 6